Linux version 2.6.12.2 (root@hal) (gcc version 3.3.6) #1 Sun Jul 24 20:40:05 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data) BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. On node 0 totalpages: 130800 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126704 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f68a0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fef69c1 ACPI: FADT (v001 KN400 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x1fefbe53 ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fefbec7 ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 20000000 (gap: 20000000:dffe0000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Zenwalk ro root=303 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1858.228 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514616k/523200k available (2111k kernel code, 8020k reserved, 1001k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3678.20 BogoMIPS (lpj=1839104) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000 CPU: AMD Mobile AMD Athlon(tm) XP 2500+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0400 (from 0a30) NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd65c, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *4) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs *9) ACPI: PCI Interrupt Link [LNKD] (IRQs *11) ACPI: Embedded Controller [EC0] (gpe 1) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:05: ioport range 0xfe10-0xfe11 has been reserved pnp: 00:05: ioport range 0x600-0x60f has been reserved pnp: 00:05: ioport range 0xfe00-0xfe00 has been reserved pnp: 00:05: ioport range 0x4000-0x407f could not be reserved Initializing Cryptographic API vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 1536k, total 131072k vesafb: mode is 1024x768x8, linelength=1024, pages=169 vesafb: protected mode interface info at c000:5729 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 4 (level, low) -> IRQ 4 PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 4 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-K12D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide libata version 1.11 loaded. mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 ACPI wakeup devices: PCI0 USB1 USB2 USB3 USB4 Z003 LAN LID ACPI: (supports S0 S3 S4 S5) input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad on isa0060/serio1 VFS: Mounted root (reiser4 filesystem) readonly. Freeing unused kernel memory: 152k freed Adding 1004020k swap on /dev/hda6. Priority:-1 extents:1 NET: Registered protocol family 23 Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (55 C) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (on-line) powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Detected 1857.791 MHz processor. powernow: SGTC: 13333 powernow: Minimum speed 928 MHz. Maximum speed 1857 MHz. Linux agpgart interface v0.101 (c) Dave Jones fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 4 (level, low) -> IRQ 4 [fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0 usbcore: registered new driver usbfs usbcore: registered new driver hub ndiswrapper version 1.2 loaded (preempt=yes,smp=no) ndiswrapper: driver bcmwl5a (Broadcom,07/17/2003, 3.30.15.0) loaded ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ndiswrapper: using irq 11 wlan0: ndiswrapper ethernet device 00:0b:6b:48:0f:a7 using driver bcmwl5a, configuration file 14E4:4320.5.conf wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names NTFS driver 2.1.22 [Flags: R/W MODULE]. NTFS volume version 3.0. NTFS volume version 3.0. Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:00:07.0 [1025:003e] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:07.0, mfunc 0x01201212, devctl 0x64 Yenta: ISA IRQ mask 0x0008, PCI irq 5 Socket status: 30000006 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 4 (level, low) -> IRQ 4 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 4, io base 0x00001c00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 5, io base 0x00001c20 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 9, io base 0x00001c40 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 usb 3-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 11, io mem 0xd0006800 ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 usbcore: registered new driver hiddev hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usbhid: probe of 1-2:1.0 failed with error -5 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usb 3-1: USB disconnect, address 2 Initializing USB Mass Storage driver... input: USB HIDBP Mouse 062a:0000 on usb-0000:00:10.0-2 usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 1-2: USB disconnect, address 2 usb 1-2: new low speed USB device using uhci_hcd and address 3 via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: USB HID v1.10 Mouse [062a:0000] on usb-0000:00:10.0-2 usb 3-1: new full speed USB device using uhci_hcd and address 4 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb 3-2: new full speed USB device using uhci_hcd and address 5 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 4 (level, low) -> IRQ 4 eth0: VIA Rhine II at 0x11800, 00:c0:9f:2f:82:09, IRQ 4. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. Bluetooth: HCI USB driver ver 2.8 usbcore: registered new driver hci_usb eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Intel ISA PCIC probe: not found. Device 'i82365.0' does not have a release() function, it is broken and must be fixed. Databook TCIC-2 PCMCIA probe: not found. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. Vendor: Generic Model: Flash R/W Rev: 2002 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete agpgart: Detected VIA KM400/KM400A chipset agpgart: AGP aperture is 256M @ 0xe0000000 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [fglrx] Kernel AGP support doesn't provide agplock functionality. [fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset) agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps) [fglrx] free AGP = 256126976 [fglrx] max AGP = 256126976 [fglrx] free LFB = 114274304 [fglrx] max LFB = 114274304 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 [fglrx] total FB = 0 [fglrx] total AGP = 65536